TOP

About Operation Of X431 Diagun and Promotion

X-431 Diagun is a hi-tech product. But nowadays, automotive technology are making daily advance, and there may be questions during operation. Read the user’s manual carefully to get answers whenever you have any question, or contact our Customer Service Center for help.

The X431 Diagun in Vtoolshop is in promotion. We offer ONE MORE BATTERY free as gift and sold US$ 699.99 in total. It shipped via DHL free shipping worldwide. It will ends soon. Hurry up to win the free battery.

Question: System halts when reading data stream. What is the reason?
Answer: It may be caused by a slackened connector. Please turn off the machine, firmly connect the connector, and switch on the machine again.

Question: The appliance is blank screened after a while during its operation.
Answer: Power saving was set in the power management. Press power key to resume it. Or you can set “None” or extend the standby time in Power Off interface.

Maxidas ds708 is also very HOT in Vtoolshop! Welcome to order directly online!

Read More
TOP

FAQ about launch X431 calibrate touch screen

Have you face the problem like following situation?’Shut! Why won’t my machine
power up? The screen is too white, I can’t see the display. How do I adjust
the contrast?’Don’t worry ,just calm down.

As we all know,Launch X431 adopts open diagnostic technology, which is the most
advanced in the world as well as the future of automotive diagnosis.But do you
really know how to work it well? Here let’s focus on how to troubleshoot the
calibrate touch screen on launch X431 for our customers.

At first,you should remember that after switchiing on the machine,follow the
tips to press the hot key.The calibration interface will be opened.If you
followed this step then you should Click the cross cursor on the screen accurately (precisely in the center of the cross), and wait until it changes.
The cross-cursor will then move to each of the four corners.After the second
step,then you should repeat the process of clicking in the center of each
cross-cursor until the process finishes. The screen will then return to the
main interface.

Moreover,you should remember do not click the touch screen before the cross
cursor appears.This is a basic principle but that tip you must follow.To know more

about launch x431 gds,please keep your habit of visiting our website.

Read More
TOP

FAQ About System Setting Of X431 Diagun

Question: The screen is inactive after the cross cursor appears.
Answer: The system is calibrating the touch screen. The machine will work after the calibration completed.

Question: The screen does not respond or responds incorrectly when click with stylus.
Answer: It is necessary to calibrate the screen.
Details may refer to “Calibrate Touch Screen” below:
1. Click the touch screen in the above figure to enter into ‘Calibrate Touch Screen’ interface, as shown on the left. Click the cross cursor on the screen accurately by order, once it changes, you complete a calibration. If you don’t want to calibrate, press the power key to skip the calibrating interface.
Note: If you click the cross cursor inaccurately, it will repeated on the screen until the calibration completed.
2. The screen will display interface as shown on the left after the touch screen was calibrated. You can click to enter the system desktop, or wait for 30 seconds to enter automatically.
Note: You can also calibrate the touch screen by clicking “Start Menu-Control Panel- stylus-calibrate”

Question: The time displayed in the bottom right-hand corner of the screen is incorrect. How to ajust it?
Answer: The time was set incorrectly.
Details may refer to “Taskbar” below:
Taskbar locates at the bottom of X431 Diagun system desktop, as shown on the left.
A. ‘Start’ Button: the same way as on Windows98/XP.
B. ‘Network Connection’ Icon: display network connection state (when connected to PC).
C. Time: double-click it with stylus to set time, data and time zone.
D. ‘Soft Keyboard’ Icon: display or hide the soft keyboard, when the soft keyboard is activated, there are two input options: Manual input and English input.
E. ‘Swift’ Icon: click to display the desktop, and switch among different interfaces.

If you need digimaster iii, pls enter into http://www.vtoolshop.com/digimaster-3digimaster-iii_p88.html.

Read More
TOP

The advantage of using Launch X431

Vehicle maintenance is past the core machinery repair manual skills, the main
emphasis on vehicle maintenance technology, and to repair parts for the major
maintenance technology, but also assembly and disassembly process to adjust the
combination of parts repair process.

As for the tools,we’d like to introduce you launch x431.The biggest Launch X431
advantage is cost-effective, said that its price in the range of six to ninety
thousand yuan between, if so will be more competitive. Although it did not like the FAW SAIC – so go in the high-end line, it is know one’s limitations.The
driver’s hand only need to do an action can shift drum rotation, Launch X431
before the ultra-running and a lot of Formula One, WRC, etc.
Among all the launch X431,Launch X431 Heavy Duty is a new automotive diagnostic
machine for trucks and designed by LAUNCH. It includes all the advantages of
its predecessor, It is designed to cover heavy duty diesel and gas-fueled
vehicle models of 12V & 24V voltage. It can read DTC, read DataStream,
actuation test, sensor waveform display and ECU coding. It is faster to
communicate with Trucks. Hope all information can help you,for more news,please
visit our launch X431 gds.

Read More
TOP

FAQ About Hardware Of X431 Diagun

Question: Why the LCD touch screen responds so slowly in cold weather?

Answer: It is because the ambient temperature is close to the lower limit of operating temperature range (0-50℃). In this situation, it is necessary to warm up the machine for 30 minutes before test.

Question: Why there is no character on the backlit screen?
Answer: Check if the power is well connected. Turn off the machine, uplug it and then plug it again for power supply, one second later, try to turn on the machine.

Question: Why X-431 Diagun fails in communication with EUC?
Answer: Please check and make sure that the diagnostic connector and diagnostic program are matching the vehicle make.

Question: The screen keeps blank after flashing when the machine is turned on.
Answer: Take out the TF card and re-start the machine to check if there is normal display. If the display is normal when the TF card is taken out, the TF card should be replaced. If the screen is still blank, please contact the local service engineer.

Question: Why can’t the data be input after Soft Keyboard is activated?
Answer: The position where the cursor locates can’t be edited. Or you have not activated the cursor in the input position, please use the stylus to click the part to edit. You can input the data if the cursor flashes.

Question: Why the saved data disappeared?
Answer: There are two possible causes:
1. Your TF card is damaged.
2. You’ve changed language, which is related to the data. You may find the data after switching back to the former language.

Question: The screen does not respond or responds incorrectly when click with stylus.
Answer: It is necessary to calibrate the screen.

Question: What can i do when the screen is confused?
Answer: Please quit the current application (interface), and run it again, If the problem still exists, please restart the system.

PS. 2012 latest version launch x431 gds is arriving, welcome to order in www.vtoolshop.com.

Read More
TOP

Detail of using OBD Code Scanners

An OBD-II code reader is an electronic device that allows you to plug into your
computer’s OBD diagnostic port and access technical information. OBD code
reader
come in a variety of shapes and sizes. Some work in conjuction with a
laptop computer and software. In those cases, you basically get right way to use
it.

At first, you should remove the IMMO bos from the vehicle.The location is on the
ignition lock. And then desolering the two pins of coil connection and removing
the circuit from the box.You must make sure that you have find an EEPROM
“24LC02B”. After this process,Clear every pin of 24LC02B and connect the clips
with microchip, black point to pin1 of 24LC02B.Then press “Read Pin” button on
the unit. The screen will show the “pin code”.That’s a simple but very important
step.

Hope you can get all the details and work well with car code scanner.Any further

problem, you can consult our website.We’ll provide more knowage about it.Please

keep trace  with our information,so you can know What to be done to fix the problem?

Read More
TOP

LAUNCH Company X-431 Diagun instructions

Operation car ECU attention
Equipped with computer control system of the car diagnostic tool when operating, we should pay attention to the following items:
-when the ignition switch, can never disconnect car interior electrical devices, because in the disconnect, because of the coil puts role, will produce a high instantaneous voltage, the voltage will cause and the damage of the sensors ECU.
-not to be radio magnetic speaker object under close to the computer place, because the magnet will damage the speaker of the circuit and components ECU.
-when in cars for welding operations, cut off the power system and the ECU in advance.
-computer or sensors in near the place repair work, should be more attention, lest damage ECU and sensors.
-in disassembling programmable read only memory, homework personnel shall be take iron, or on the static electricity will damage the ECU circuit.
-except in the test program that the special, can’t use the pointer type ohms table test ECU and sensor, and should use high impedance test of digital instrument.
-don’t use test light to test the relevant electric equipment and ECU, in order to prevent the ECU or sensor damage, unless otherwise specified.
-when people in and out when the car, the human body of electrostatic discharge can produce up to 10000 V high pressure, so the ECU control digital instrument maintenance operation, or close to the meter, be sure to wear take iron metal bands, will its end bound on the wrist, the other end caught in the vehicle body.
-should be reliable connection ECU wire connectors, otherwise it might damage the ECU internal integrated circuit and other electronic components.

Use instrument precautions
-the instrument for precision electronic instrument, use do not fall in touch.
-the test, should guarantee the instrument and diagnosis a connection between good, lest interrupt signal on test.
-don’t in the instrument of boot inserted TF card.
-finished using X-431 Diagun attention will be inserted after touching pen to host the after jack, and at the same time, to cable and joint and other accessories to put it back to avoid missing packing cases.
Gentle with-as far as possible, avoid impact.

Read More
TOP

X431 Diagun In Vtoolshop Provide Gift

X431 Diagun in Vtoolshop is in promotion now! We offer one more battery for customers as gift!

It ends soon, hurry up to win your gift!

 

Feature
- Compact main unit -Standard equipment for technicians
- The only diagnostic tool which can work on two vehicles at the same time
- Bluetooth technology, wireless communication. 100 m bluetooth communication,Cable communication support
- Universal 16PIN connector
- Fully inherited diagnostic functions from X-431. Capable of nearly all domestic vehicle makes and Asian, European, American vehicle makes.
- Greatly improved program running speed
- More convenient software update
- 4.3 inch high luminance, high resolution color touch screen
- 1530mAh Rechargeable battary
- 1G memory card
- Standard USB printer connector, external printer support
- Full after sales service system, life time 1 to 1 service

*Printer available in DIAGUN:
LENNOVO: LJ2250/LJ2250N, P3900 Series
BROTHER: P2150, 5200/6200 Series and MW-120,MW-140BT,MW-260 model.
Others: Printers available that support PCL printing language.

Notes: Customers can store what they want to print in TF card as a form of picture. Then connect to PC and print it after testing.
Install the patch of DIAGUN printer before printing (downloaded on X431 website).

*For the battery performance, it is recommended to charge the battery fully before the first application.

Specification
Operating System: WIN CE 5.0
CPU: 400 MHz ARM9
Memory Card: 1G TF Card
Main Unit: Universal Serial Bus/USB
Main Unit Power: DC5V
X-431 Diagun Connector: DC12V/24V
Printer Interface: USB
Display Screen: 480X272, 4.3-inch LCD with touch screen
Rechargeable Battery: 1450 mAh
Bluetooth: theoretically 100m, suggest 15-20m
Upgrading Interface: USB

Welcome to order directly on our website http://www.vtoolshop.com/launch-x431-x431-diagun_p225.html.

Read More
TOP

Features Of Launch X431 Mater

Universal
X431 MASTER is a unique product with universal functions far beyond the original decoder of the tested models. It covers hunderds of models of more than 100 vehicles makes both domestics and abroad, including the followings:
- European series: Mercedes-Benz, BMW, Volkswagen, Fiat, Volvo, Citroen, Renault, Peugeot, Opel, Porsche, LAND ROVER, etc.
- American series: GM, Ford, Chrysler, etc.
- Asian series: Toyota, Nissan, Honda, Mitsubishi, Mazda, Subaru in Japan, and Hyundai, Daewoo, Kia in South Korea, etc.
- China-brand series: Chery, Geely, Great Wall, etc., totaling more than 60 domestic series.
- Others: Local models in Malaysia, Russia, India, Mexico, Australia and other countries.

Online Update
- The function of online update makes it easy for customer to get the latest diagnostic program and keep pace with the development of automotive technology.

Open
- Open operating system. That is, X431 Master is an open automobile diagnostic platform with multifunction and multi-language based on LINUX operating system.
- X431 Master provides open interface to support the third party’s development.

Advanced
X431 MASTER is the most advanced automobile diagnostic unit in the world at present. It is designed compactly with modern outline and large LCD touch screen. With built in printer makes the operation easy.
The product is a combination of the automobile industry and the communication technology, which starts the new development trend in the automobile diagnosis field. This product not only provides a new way of automotive diagnosis for vehicle service station, but also becomes a favorable choice for “DIYers”.

Notice: Our X431 Diagun is inpomotion now, we offer one more battery as gift! Ends soon, hurry up! 

Read More
TOP

Launch creader v is newly developed by LAUNCH

Launch creader v is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician. The feature of upgrading online ensures it can test new model cars and/or functions in the future.

Feature
1. Read Codes
2. Erase Codes
3. View Freeze Data
4. Data Stream
Entire Data list
Custom Data list
5. Special Tests
I/M Readiness
MIL Status
O2 Sensor Test
On-board monitor test
EVAP system test
Vehicle Info
6. Code Lookup

Specification
Display: Backlit, 160 x 160 pixels
Operating Temperature: 0 to 60°C (32 to 140 F°)
Storage Temperature: -20 to 70°C (-4 to 158 F°)
Power: 8 to 18 Volts provided via DLC
Unit Dimensions: 126 mm×88 mm×22 mm(Length×Width×Thickness)
Test Cable length: 0.9m

Digimaster 3 and x431 diagun are also on stock. Moreover, our X431 Diagun is inpromotion now, we offer one more battery as gift! Hurry up!

Read More