TOP

Essential information about MST-1 Universal Auto Scanner

Dec 20
Posted by vtool in Auto Key Programmer, BMW Key Programmer, car diagnostic tool

MST-1 auto scanner tool is a new generation WIRELESS Mst-1 is a professional diagnostic scan
tool that adopts the latest internet and computer technologies to create an uniquely flexible tool with an open architecture platform.
MST-1 Universal Auto Scanner
It is compatible with WINDOWS 7 system.
MST-1 auto scanner provides dealer level diagnostic power with an affordable price by using
the owners existing laptop or PC. It is powerful, affordable, expandable and very flexible.

CAUTION

  •  Do not disassemble or alter this tester.
  •  When using the battery clips, the red one should be connected with the anode of the battery, and the black clip should be connected with the cathode of the battery.
  •  Do not work anywhere that water could come in contact with the equipment.
  •  Do not drop this tester or subject it to a strong impact.
  •  Do not leave this tester in any location subject to excessive heat for example in direct sunlight or inside a car on a sunny day.
  •  Bolck the wheels of the vehicle with chocks before carring out work such as connecting the tester cable
  • Do not pass the cable for this tester over the engine compartment while the engine is running.
  •  Do not work connect the tester cables etc. while the vehicle is running.
  •  When working anywhere not be easily visible, for example under the vehicle, always remove the key from the ignition to ensure the vehicle cannot be moved.
  • When working near the engine compartment, be careful of the engine and other high-temperature parts

 Standard Components

 Connecton ports 

Indicator lights: There are three indicators (as in the picture),the one in the right is power
indicator, the others are communication signal. Normally, the power indicator should be on
red when connected with the car diagnostic socket, and the signal indicator is green light
while it is starting diagnosing, if not, please contact us.

Working Condition:
1) Turn the vehicle ignition switch on.
2) The Voltage of the vehicle is 12-14V, the voltage of MST-1 is 12V.
3) Make sure the Throttle Valve is closed.
4) Ignition time and Idle speed must be in standard range, the water temperature must
be (90-110℃), the auto transmission temperature must be 50-80℃.

 Connection 

Make sure:
1) The Wireless Box connected with PC and signal indicator flashs in red
2) The software well downloaded as in chapter 2.1.
3) The MST-1 multiplexer properly connected with the car as in the picture(1) or (2) as
belows:

P.S. : If the power supply of digonostic plug with a low battery or damaged, the power
supply can be collected as following:
1. By using ignition lighter cable: Connect the ignition lighter cable with the car
2. By using battery cable: Clip the vehicle’s battery with battery cable

Read More
Tags: , , , ,
Comments Off
TOP

Essential information about BMW OPPS Diagnose and Programming

Nov 19
Posted by vtool in BMW Key Programmer

How to use BMW OPPS Diagnose and Programming professionally? Let’s focus on the issue together.

OPPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS /BMW ops PRO .

If it success ,the screen will show SSSV37 operating .

At first, Please make sure the antivirus software on your computer is closedwhen you use the hard disk and login into your own computer as systemadministrator.

Have a try. If it doesn’t work. You should change another computer to use it.AboutINSUFFICIENT PERMISSION: no privileges….. Should be the issue of your system. You can change another computer to check.

OPPS’s feature compare with GT1 ,ops:

Actually the three tools BMW GT1, BMW OPS and BMW OPPS share the same software, but the hardware is different make them with different usage.

If you want a tool that can scan all bmw autos, you can use the three together – BMW GT1 + BMW OPS + BMW OPPS.

the BMW GT1, OPS, OPPS all share the same software, the difference is in the hardware, therefore have different functions.
- GT1 is good for old type cars before 2005, it has no optical cable for new car diagnosis;
- OPS is good for newer vehicles, 2005-2010 year, so is OPPS

More details:
OPPS has been designed for encoding, individualising and programming ( CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.

OPS is mainly for models after E65 which seems for newer models via OBDII socket and fiber cable (OPS comes with DIS for diagnosis & coding and SSS for programming).
As for the BMW OPPS , i think it is used in automotive factory more often. Common BMW owners dont need such expensive tool, using OPS is full enough.

 

 

 

Read More
Tags: , , ,
Comments Off
TOP

All about C4 at vtoolshop

Oct 08
Posted by vtool in BMW Key Programmer

There are mainly 4 products hot selling at vtoolshop. Let’s focus on them together:

MB Star C4 PRO , New MB Star C4 ,Good Quality MINI OPS C4,MB STAR Compact C4 Mercedes Benz Star Diagnostic.

MB STAR C4 409 usd

MB STAR C4 is the professional diagnostic equipment for Mer-Bz cars manufactured, it is the replacement of HHT. IBM Compact 4 operates based on the Windows XP system.

MB STAR C4 Function

- 1989~up to now Car, Bus, Truck, Sprint, Smart; (support:W204,W212,W207)
- All electric system Diagnostic; (Do not include flash code);
- Reading out and erasing trouble code; reading the real-time data of sensor and actuator; testing the components of cars; coding and programming.
Character:
- Realizes all the function of official factory Mer-Bz compact 3.
- C4 Multiplexer can connect to factory computer and IBM laptop.
- Complete maintenance data. It could offer full disassembly and assembly circuit diagram, working principle and element place anytime needed. It is the best assistant for maintenance man.

MB STAR C4 Software language

English/Chinese/Deutsch/French/Italian/Korean/Spanish/Portuguese/
Finnish/Danish/Japan/Swedish

Optional Configuration: 
- IB M laptop: T30 or any computer with external HDD
- Tool box
- COM connect with the laptop cable
- Hard disk of each language.

MB STAR C4 Package includes

- C4 STAR MULTIPLEXER( Benx VCI)
- 16 PIN OBD II cable (OBD Diagnostic Socket )
- 38 PIN cable (Old Benz Round Socket )
- 14 PIN cable (Sprint. Bus. Truck Round Socket)
- 4 PIN cable (Old Benz Rectangle Socket)
- 19 PIN cable (Computer Communication)
Product software includes
DAS : the automatically Diagnosis Assistance System
- Workshop Information System
- Electronic Parts Catalog
ST finder : Part location finder
STARUTILITIES : the movement management system and self-test

Mini OPS+c4 960 usd

Mini OPS+c4 is the lately updated professional diagnostic equipment for BMW cars . It is more smaller in size ,lighter in weight than OPS. Mini OPS can do all the works what OPS does and it is the update diagnostic scanner tool for OPS.

Advantages of Mini OPS

Good after-sales service: maintenance, warranty period and free upgrade last one year.
New version.
SSS V32 (IBM T30 Software Service, Many kinds of Languages )
DIS V56 (IBM T30 Software Service)
characteristic: updated through DVD, 100% the same with original.
More stable than OPS.

Functions

This item include MB STAR C4 and for BMW GT1 PRO diagnostic scanners in one parcel.
MB Star C4 can work full functions with MB STAR diagnostic software and GT1 for BMW Pro has all functions of GT1 (DIS and SSS).
All three softwares pre-installed in one harddisk, for IBM t30. (LAPTOP don’t include in this product)

Package included

for Benz c4 multiplexer x 1pic
C4 cables:
-38pin cable x 1pic
-diagnosis cable x 1pic
-laptop cable x 1pic
-power cable x 1pic
-4pin cable x 1pic
-TwinB OBD-16pin connector x 1pic
-TwinB MB-14pin connector x 1pic
Gt1for BMW Pro mutiplexer x 1pic
Gt1 Pro cables:
-diagnosis cable x 1pic (share)
-Lan cable x 1pic
-power cable x 1pic (share)
-TwinB OBD-16pin connector x 1

Mercedes Star C4 Diagnostic 726 usd

Benz compact 4
Mercedes Star C4 Diagnostic Tool is the professional diagnostic equipment for Mercedes Benz cars manufacturer.
Benz Compact 4- PC version
Mercedes Star C4 Diagnostic Tool is the professional diagnostic equipment for Mercedes Benz cars manufactured, it is the replacement of HHT. IBM Compact 4 operates based on the Windows XP system.

Mercedes Star C4 Diagnostic Tool Advantages:

Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

Compatibility: All Merce des Benz vehicles with OBDII

Software language: English/Chinese/Deutsch/French/Italian/Korean/Spanish/Portuguese/ Finnish/Danish/Japan/Swedish.

Mercedes Star C4 Diagnostic Tool Functions:

- 1989~up to now Car, Bus, Truck, Sprint, Smart;
- All electric system Diagnostic; (Do not include flash code);
- Reading out and erasing trouble code; reading the real-time data of sensor and actuator; testing the components of cars; coding and programming.

Mercedes Star C4 Diagnostic Tool Packing List:

- SD connect
- OBD-II cable
- 38 pin cable
- 14 pin cable
- 4 pin cable
- Lan cable

MB Star C4 pro 416 usd

MB STAR C4 is the professional diagnostic equipment for Mer-Bz cars manufactured, it is the replacement of HHT. IBM Compact 4 operates based on the Windows XP system.
It is the lately updated professional diagnostic equipment for Mercedes Benz cars manufactured after year 2000.It is much difference in the shape from Compact3 and smaller in size ,lighter in weight than Compact3.C4 2009 can do all the works what Compact3 does and it is the replacement of Compact3-Star.
C4 operates based on the Windows XP system, it includes workshops information system(WIS system), the movement management system and the automatically diagnose system(the DAS system) .C4 2008 STAR works with original computer (COMPACT3) via both of RS232 and 485 protocol.Power can be supplied to original computer (COMPACT3) via the cables.Compact3 star can diagnose varied cars, trucks, buses of Mercedes Benz making.

MB Star C4 Functions:

- 1989~up to now Car, Bus, Truck, Sprint, Smart;
- All electric system Diagnostic; (Do not include flash code);
- Reading out and erasing trouble code; reading the real-time data of sensor and actuator; -testing the components of cars; coding and programming.

MB Star C4 Packing List:

- C4 STAR MULTIPLEXER( Benx VCI)
- 16 PIN OBD II cable (OBD Diagnostic Socket )
- 38 PIN cable (Old Benz Round Socket )
- 14 PIN cable (Sprint. Bus. Truck Round Socket)
- 4 PIN cable (Old Benz Rectangle Socket)
- 19 PIN cable (Computer Communication)
- Hard disk with software
One 60G external Hard Disc/or 40G internal t30 HDD for DAS, EPC and WIS, FINDER,XENTRY

NOTE:We have Two types of Hard Disk with software,one is external hard disk which can fit on any computer.
The other one is internal hard disk which only fit on IBM T30. Please leave us a message which type of Hard Disk you want and what’s language of the soft you want.
External English hard disk will be chose by fault.

Read More
Tags: , , ,
Comments Off
TOP

latest economical Professional Super Scanner OPPS with top quality

Sep 14
Posted by vtool in BMW Key Programmer

There are mainly 2 kinds of OPPS hot selling at vtoolshop.

BMW OPPS works on vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.This product have a better quality than BMW OPS.

  1. BMW OPPS Diagnose and Programming Fit IBM T30 Version DIS V57 SSS V41
  2. BMW OPPS Diagnose and Programming Fit All Computer Version DIS V57 SSS V39

BMW OPPS Diagnose and Programming

On vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.

OPPS has been designed for encoding, individualising and programming (CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.

OPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.

Supported languages:
SSS – German, French, Spanish, Italian, Netherland, Swedish, Japan, Chinese, Korean, Thai, Taiwan, Russian, Indonesian, Turkish, Greek, Portugese;
DIS – English/ Chinese

Please attention this machine can only do diagnose and programming,which is DIS  and SSS. The measure menu in the software can not works.

Package list:

OPPS head
16 Pin OBD Cable
LAN cable (RJ45 / ODU plug)
Fiber Cable
Hard disk with DIS V57 SSS V39

BMW OPPS Diagnose and Programming Fit IBM T30 Version DIS V57 SSS V41 is the same with BMW OPPS Diagnose and Programming Fit All Computer Version DIS V57 SSS V39, except Hard disk 

Attention: pls leave your meaasge about which version BMW and BENZ Scanner

you’d like  when you make payment for this product on our website.

 

 

Read More
Tags: , , ,
Comments Off
TOP

Difference between AK90 BMW Key Programmer and AK90 Key Programmer

Sep 06
Posted by vtool in BMW Key Programmer

AK90 BMW KEY-PROG increased by 1995-2009 in all BMW EWS read the key information functions;improved some of the EWS to read and write speed. This product safe and effective, is the key to match the best tool for BMW.

BMW AK90 Key Programmer Functions:

1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
2. With the help of software you can renew , lock or unlock keys as well.
3. Programming original chips EML 10030A for making keys .
4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.
The lastest update software version is V3.16 for EWS4.4
EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4

BMW AK90 Key Programmer Package list:

1pc x AK90 Host
1pc x AK90 10 Pin Cable
1pc x AK90-Chip data to read specific seat
1pc x AK90 V3.09 software CD-ROM
1pc x AK90 USB communication cable

AK90 Key Programmer is the same with BMW AK90 Key Programmer.

Supported EWS Systems :

EWS2.1
EWS2.2
EWS3
EWS3.3
EWS4
EWS4.4

However, the software is v 3.16 . AK90 BMW KEY-PROG V3.16 is a best safe and effective key match tool for BMW EWS system. About  ak90 keymaker use operation video, you can watch how to use ak90 keymaker in Youtube video.

Read More
Tags: , ,
Comments Off
TOP

All about BMW concerned product

Aug 04
Posted by vtool in BMW Key Programmer

There are many BMW concerned products hot selling at vtoolshop : X431 BMW OLD 20 pin, CAS3 Car Mileage Correction Programmer for BMW,BMW Airbag Reset Tool B800,BMW Transponder Key Programmer,BMW Key programmer,AK90 BMW Key Programmer,BMW Smart Key,DB9 Female to BMW20 Pin,BMW20 PIN TO Palm,BMW Adaptor 20 pin Code Reader,OBD2 Female to BMW20,BMW INPA Cable,Lan Cable for BMW GT1 Scanner Tool,BMW GT1,BMW OPS Scanner,BMW OPS PRO,New MB Star C4,Mercedes Benz W221 Can Filter,Benz W164 Can Filter,BMW Scanner 1.4,BMW Carsoft 6.5,Mercedes Benz W204 Can Filter,BMW EWS K-Line ROGRAMMER,BMW Key Reader, BMW OPPS Diagnose and Programming , BMW 20 for GT1 Professional Car Diagnostic Cable Line,The BMW Pixel Repair Tool,BMW 20PIN KTS 5,BMW INPA,BMW ICOM ISIS BMW Software HDD,BMW MINI OPS.

All of these X431 BMW OLD 20 pin, CAS3 Car Mileage Correction Programmer for BMW,BMW Airbag Reset Tool B800,BMW Transponder
Key Programmer,BMW Key programmer,AK90 BMW Key Programmer,BMW Smart Key,DB9 Female to BMW20 Pin,BMW20 PIN TO Palm,BMW Adaptor 20 pin Code Reader,OBD2 Female to BMW20,BMW INPA Cable,Lan Cable for BMW GT1 Scanner Tool,BMW GT1,BMW OPS Scanner,BMW OPS PRO,New MB Star C4,Mercedes Benz W221 Can Filter,Benz W164 Can Filter,BMW Scanner 1.4,BMW Carsoft 6.5,Mercedes Benz W204 Can Filter,BMW EWS KLinePROGRAMMER,BMW Key Reader,BMW OPPS Diagnose and Programming, BMW 20 for GT1 Professional Car Diagnostic Cable Line,The BMW Pixel Repair Tool,BMW 20PIN KTS 5,BMW INPA,BMW ICOM ISIS BMW Software HDD,BMW MINI OPS  are at surprising low price while the high quality is the main reason for their popular.

From the image of these products, you can see some:


These products are all good feedback,especially BMW OPPS and ops series. With the great technical staff support,we believe more and more customer will get their most ideal BMW concerned product from vtoolshop.

Read More
Tags: , ,
Comments Off
TOP

Manual For BMW key programmer

Jul 16
Posted by vtool in BMW Key Programmer

Introduction

BMW key programmer device and software are for vehicles equiped with EWS module , coverage 1994-2004 that have EWS module(including EWS2, EWS3 and EWS3+, Rover75, MINI, RangeRover, FreeLander, Discovery).You can programm new keys when all keys are lost or stolen by .this device. Of cause be able to add new keys. http://www.cnreliable.com
Support EWS 2,EWS 3,EWS 3+:Include 0D46J, 1D47J, 2D47J, 2D47J(with secured) Safe for reading data from EWS (with secured).

Part One: Install hardware
Connect with DC-12V power supply, turn the Mode switch to M1, the indicator light is on, connect the device and PC by USB line. As below picture:

 

On board connect. For EWS2 (MCU Masker 1D47J) , EWS3 (MCU Masker 2D47J) .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In circuit connect. For EWS2 (MCU Masker 2D47J).

If the Serial Port Number is greater than COM4, you must choose the port in COM1-COM4.
Go to [Device Manager], it shows as below:

 

 

 

Choose [BMW KEY (COM5)], right click choose Properties, it shows as below:

 

 

 

 

 

 

 

 

Go to [Port Settings] panel, then click [Advanced…], it shows as below: Choose one COM Port Number (COM1-COM4), and then click OK to finish the operation.

 

Part Three: Operations

Key Programmer principle: Use the device to read the data of EWS (anti-thief control box), then write the data into a new key or key-chip. Please note, a key or key-chip can be written just once, can not be rewritten.
That means the old key cannot be programmed again. The key or key-chip which you want to be programmed must be new.
1. M1 (secure) mode
Take the “EWS 3 A” of mask 2D47J as an example. Select this type then click [Zoom in], follow the related operations, click [Next]. As below shows:


Software will remind you switch to M1 mode, the red indicator light should light now, then click [OK] turn into
following screen:

 

Click [Read], then SAVE data, please mark down the save path, usually the default save path is C:\Program Files\BMW_KEY\UserBackfile. Please also memorize the file name, such as [EWS 3 A_2D47J_2001-2006_2007-03-23_0006.BIN]. Save the data then click [MAKE KEY], now it will display as below. In addition, [Open] and [Write] button is used for writing or other purpose by well-informed user. So these two buttons are out of the scope of regular operation.


Operation steps: Switch to M2 mode, the M2 indicator light should light.
First step: Choose the right COM port (COM1-COM4).
Second step: Input the key serial number (0~9), recommend input upward of number 4.
Third step: Open the Key matching file. Find the file on original save path, usually on path
C:\Program Files\ BMW_KEY\UserBackFile. Click [Open].
Forth step: Put the new key or key-chip on the inductive area properly, then click [Insert and program Keys].

Read More
Tags: , ,
Comments Off
TOP

All about new BMW Key programmer

Jul 12
Posted by vtool in BMW Key Programmer

We are professional in exporting various automotive diagnostic tools,principally involved in areas of  BMW Key Programmer  and Benz Key Programmer.

New BMW Key Programmer is specially designed for BMW keys, is easy operating. ANYTOOLS offer New BMW Key Programmer, if New BMW Key Programmer intestest you,pls contact us.

BMW Key programmer Description:

BMW key Programmer is a simple-designed programmer specially designed for BMW keys, is easy operating. EWS2/3/3+, Rover75, MINI, RangeRover, Free Lander, Discovery. Ideal for lost or add keys Support on all the BMW with EWS, (including EWS2, EWS3 and EWS4). Only use normal chip can provide the efficaciously maintenance of broken keys of BMW. Read EWS Data via K line. This is a safe, credible produce and has own perennial maintenance.
BMW Key programmer Funtion:

-Reading and writing EWS1, EWS2, EWS3, EWS3+ using CarProg Motorola cable;
-Automatic identification EWS version of dump;
-Adding new keys;
-Adding already used keys (with a password key);
-”Cleaning” is used keys (with a password key);
-Restoring key synchronization;
-The blocking and unblocking access to the car keys;
-Reading and changing data coding (for the vehicle);
-Changing parameters EWS (product number, date of manufacture, etc.);
-Change VIN number stored in EWS;
-Change VIN numbers in the key (stored in key after 1998);
-Changing mileage in EWS (in EWS after 1998);
-Changing mileage in the key;
Packing List:

1x BMW Key Programmer
1x Power Adapter
1x Serial Port Cable

If you are interested in our  New BMW Key Programmer and other car diagnostic tool , please contact us by email or just click here to send us an enquiry.

 

Read More
Tags:
Comments Off