The Universal Dash Programmer Tacho Pro 2008 handheld is powerded with 12 V by a 3,5 mm miniplug (port 1). Please use an AC adapter with at least 500 mA, better 1 A.
External power supply is necessary when programming a detached odometer. When programming through the diagnostic port, the handdeld is powered by the car through the port. The diagnostic plug is positioned in port 3.
When programming through the diagnostic port, do not supply the handheld with power through port 1!
When supplying the handheld with power, you can see the start menu in the display. It offers the possibility, to change the backlight by pressing the STOP button.
Now the handheld is asking for a password. This function is always activated when you get a Universal Dash Programmer, but you can switch it off ( options).
After the start menu, you see the main menu with the different manufacturers and the menu OPTIONS, and SYNC.
With button 8 you can move up, with button 2 down. Then the bar is on the desired menu, press OK. If you have chosen a wrong menu, you can quit by pressing STOP.