Log on www.X431.com. Select the favorite language on the pull-down menu at the lower right of the interface to enter the homepage.
See Figure 4-01.
Click “Register” in the interface shown in Figure 4-01 to open the window as shown in Figure 4-02.
When the member purchases one or more products after registration, he should log onto the member area, and then click “product control” to register the newly purchased product. Refer to the section “Member login”.
The terms of service is shown in the screen. After reading and fully understand it, creader v click “I accept” button to enter the interface shown in Figure 4-02.
Fill in Product Information
Fill in product serial No., registration No. and dealer code in the interface shown in Figure 4-03.
The serial No. is marked on the back of SMARTBOX. The registration No. is in an envelope delivered with the product (the number must be kept confidential). The dealer code is attached on the last page of the user’s manual.
After the information is filled, click “Next step” to enter the next interface shown in Figure4-05.
When a product is sold, the dealer will log onto www. X431. com and enter the dealer code in the “Dealer administration” area so that the user can do effective registration later. User should contact the dealer if registration can not be done effectively.
If the filled serial No. or registration No. is invalid, the screen will display the message as shown in Figure 4-04. Click “OK” button to return to the previous interface to re-fill the correct numbers.
Fill User Information
After information is filled in the interface shown in Figure 4-05(The red textbox must be filled.
After registration, we will send the confidential information to your registered e-mail, so please make sure that your e-mail is valid.),
click “Next step”, maxidas ds708 then the screen will display the interface shown as Figure 4-06. Click “OK” then the registration is completed.
Only the registered user can download and update the software.