TOP

The clearest way to show Upgrading of Creader V

May 18
Posted by vtool in Creader V, launch creader v

There are mainly four steps to finish Upgrading of Creader V. We’d like to show the clearest way to Upgrade Creader V
for our customer and hope to make sure everything absolutely right.

  • Log on www.crecorder.com，download latest version CreaderV program upgrade-package and unzip it to local disk.
  • Connect the CreaderV to computer through USB cable and Open the Creader V Upgrade.exe, The following box will appear:

  • Select the COM Port no. using the pull-down menu, which belong to  CreaderV.
  • Click “Start”, when a message of upgrading succeed pops out, unplug USB cable. Upgrading ends.

However,there is warranty you must know. This ensure does not include any element which have been abused, altered, employed for just about any intent other than for which it experienced been intended, or used in a really method inconsistent with suggestions concerning use. The exclusive treat for just about any automotive meter found out to
be defective is restore or replacement, and LAUNCH should not be liable for just about any
consequential or incidental damages.

 

Moreover, to make it more clear, I made a chart for reference.

Want to know more about it ? Join us !!!

 

Read More
Tags:
Comments Off
TOP

Tips of airbag using

May 10
Posted by vtool in airbag reset tool

How to keep your airbag in good condition. It is very important for every one when you are driving.

- Airbag is a parts with oneoff.
Each airbag can only use one time. One your airbaig open, it will loss its function. After airbag open, you have to drive your car back to factory and rebuild one new. Normally, it will cost around 3000$ rebuild one new airbag system for your cars. It is expensive, but it is essential for drving. So, the best way for us is car code scanner airbag system in good condition.

- Do not put anything around the airbag
Do not put anything around the airbag, in front of it, near it, never do that. They would be balled out Once your airbag explode when emergency, which would bring more danger. When you install media player, CD on your cars, please comply with the rules of decorate and never change airbag system.

- How and When close your airbag
Please take care when children seat between driving seat and vice driving seat. It maybe bring danger to children when airbag working, it arising strong air pressure. So, you’d better seat your baby in behind seat. It is more safety. Once the children seat between driving seat and vice driving seat, you must be keep the airbag system off. It is very important.

- When we need repair airbag
Please pay attention to the warning light of SRS which seat on your instrument panel. If your airbag system works in order, SRS will keep on light for six seconds when you open the engine and turn the power to “ACC” or “ON”. It is testing procedure. If the SRS keep light on always, your airbag system should be in trouble. You must repair it as soon as possible. Otherwise, your airbag will be out of service when emergency arising. Another way, you can equip one diy tools of scanner for your airbag.

Following is some standard for your airbag.
- SRS, Stimulated Raman Scattering
- SRS Audio Sandbox
- SRS WOW HD
- SRS TruSurround XT
- SRS Circle Surround II
- SRS Headphone 360
- SRS 3D Center Control
- SRS TruBass
- SRS FOCUS
- SRS Definition
- SRS Dialog Clarity

Beauty your airbag system. Keep your safety any time when x431 tool enjoy driving.

Read More
Tags:
Comments Off
TOP

Launch creader v is newly developed by LAUNCH

Apr 24
Posted by vtool in Creader V

Launch creader v is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician. The feature of upgrading online ensures it can test new model cars and/or functions in the future.

Feature
1. Read Codes
2. Erase Codes
3. View Freeze Data
4. Data Stream
Entire Data list
Custom Data list
5. Special Tests
I/M Readiness
MIL Status
O2 Sensor Test
On-board monitor test
EVAP system test
Vehicle Info
6. Code Lookup

Specification
Display: Backlit, 160 x 160 pixels
Operating Temperature: 0 to 60°C (32 to 140 F°)
Storage Temperature: -20 to 70°C (-4 to 158 F°)
Power: 8 to 18 Volts provided via DLC
Unit Dimensions: 126 mm×88 mm×22 mm（Length×Width×Thickness）
Test Cable length: 0.9m

Digimaster 3 and x431 diagun are also on stock. Moreover, our X431 Diagun is inpromotion now, we offer one more battery as gift! Hurry up!

Read More
Tags: , ,
Comments Off
TOP

The trend of obd code reader Development

Apr 20
Posted by vtool in obd code reader

OBD II system technology is advanced, the detection problem of emissions is quite effective. But for driver whether to accept MIL warning, OBD II is helpless. Therefore, further more than obd code reader Ⅲ OBD big system development put on the agenda.

Ⅲ system mainly with small OBD on-board wireless transceiver system, through the wireless cellular communication, satellite communication or GPS system will vehicles VIN, fault code, and where the information such as the automatic notification management departments, administrative departments according to the level of vehicle emission problems, the issue commands, including where to go for the maintenance of the proposal, solve the problems such as the time limit emissions. In the law allows, under the premise of the time limit for the vehicle to exclude a beyond password instructions. In short, OBD Ⅲ main characteristic is the support of the social rules and regulations. In China, according to its actual conditions and some feasible solutions are investigation, such as MIL warning light setting time limit, overrun vehicles will be automatically exclude, etc.

In addition, OBD Ⅲ launch creader v system can not only to vehicle emission problems issued a warning to the drivers, and still can not accept the warning on to be punished.

Read More
Tags: ,
Comments Off
TOP

Launch Creader V DTC Example P0202

Apr 13
Posted by vtool in Creader V

I. Diagnostic Trouble Codes (DTCs)

OBDII Diagnostic Trouble Codes are codes that are stocked by the on-board computer diagnostic system in response to a problem found in the vehicle. These codes identify a particular problem area and are intended to proving you with a guide as to where a fault might be occurring within a vehicle. OBDII car diagnostic tool Trouble Codes consist of a five-digit alphanumeric code. The first character, a litter, identifies which control system sets the code. The first character, a litter, identifies which control system sets the code. The other four characters, all numbers, provide additional information on where the DTC originated and the operating conditions that caused it to set. Here below is an example to illustrate the structure of the digits:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

II. Location of the Data Link Connector (DLC)

The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16-cavity connector where diagnostic code readers interface with the vehicle’s on-board computer. The DLC is usually located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under dashboard, a lable should be there telling location. For some Asian and European vehicles, the DLC is located behind the ashtry and the ashtray must be removed to access the connector. If the launch creader v DLC cannot be found, refer to the vehicle’s service manual for the location.

Read More
Tags: ,
Comments Off
TOP

Launch x431 gds — the newest version

Apr 10
Posted by vtool in Launch x431 GDS

With the all-new GDS, you have OE-level access to Domestic, European and Asian manufacturers, for read/clear codes, live data graphing and recording, bi-directional testing and module coding. Separate modules for a 4ch. oscilloscope, ignition analyzer, sensor simulator and multi-meter are also available.

Launch x431 gds is a new generation high-end integrated diagnostic products from LAUNCH Company, it fully considered of user’s operation, usage and senses, develop to multi-function module from single function module, and integrated with Wi-Fi communication technologies to make the products more professional, industrial, modular, network and user-friendly, thereby lead automobile troubleshooting into a diversified network era comprehensively. The main module of this product integrated with display, print and diagnostic, and the remaining function modules are unified form and can be used independently. Users can purchase any functional modules that they actual needed, each functional module can connect and communicate with the main module via the standard USB.

The GDS offers unrivaled speed in the access and communication of all vehicle systems and their modules. Boot-up and navigation, as well as diagnostic procedures are performed ultra-fast and with superior coverage, both in depth and breadth.

The GDS is also Wifi-enabled, allowing you access to your favorite websites for troubleshooting advice, charts, and repair information.

Adding to the list of new features is a one-button update which allows you to update one or more carlines with the simple push of a button. Gone are the days of waiting for seasonal updates, or for the tool man to load software into your scan tool. The GDS allows you to do this right on the fly without having to connect to an external PC.

We also have launch creader v, gm tech2 in stock.

 

Read More
Tags: , ,
Comments Off
TOP

Newest — Launch x431 GDS

Apr 06
Posted by vtool in Launch x431 GDS

Launch x431 GDS is a new Generation high-end integrated diagnostic products from LAUNCH Company, it fully considered of user’s operation, usage and senses, develop to multi-function module from single function module, and integrated with Wi-Fi communication technologies to make the products more professional, industrial, modular, network and user-friendly, thereby lead automobile troubleshooting into a diversified network era comprehensively. The main module of this product integrated with display, print and diagnostic, and the remaining function modules are unified form and can be used independently. Users can purchase any functional modules that they actual needed, each functional module can connect and communicate with the main module via the standard USB.

 

It has Main Unit, but for Scopebox and Sensorbox, it’s optional , if customers needs , there need to add extra money for these!

Supported Models

1 Benz
3 Volkswagen
4 Audi
5 Skoda
6 Seat
7 Volvo
8 Citroen
9 Peugeot
10 Fiat
11 Opel
12 Renault
13 Landrover
14 Porsche
15 Ford
16 Romeo
17 Lancia
18 Rover
19 Saab
20 Transporter&V-Class
21 Toyota
22 Nissan
23 Honda
24 Mitsubishi
25 Mazda
26 Isuzu
27 Suzuki
28 Subaru
29 Daihatsu
30 Daewoo
31 Hyundai
32 Kia
33 Ssangyong
34 Ford
35GM

36 Chrysler

37 SMART
38 Cars with EOBDII & CAN-BUS system

 

Go to launch creader v

Read More
Tags: ,
Comments Off
TOP

An obd code reader is a great tool to have

Apr 06
Posted by vtool in obd code reader

An obd code reader is a great tool to have. It’s an electronic device that allows you to plug into your computer’s obdii scanner diagnostic port and access technical information such as check engine codes for your car.

Up until the last few years, owning your own obdii scanner tool was uncommon. But now you often find them in the do-it-yourselfer’s tool box. That’s because these code scanners are incredibly useful for diagnosing and fixing 1996 and newer vehicles.

The typical obdii scanner is a handheld unit that allows you to view any stored diagnostic trouble codes (DTC’s) to help troubleshoot problems with cars and trucks. Some basic features may include:

- Viewing diagnostic trouble codes for your vehicle
- Ability to reset or clear DTC codes
- LCD screen readouts
- Code definitions right on the unit

The obdii scanner is so handy to have. It’s fun to pull codes and find out for yourself what’s going on with your vehicle. It can save you a lot of money too. Everyone should have there own obdii scanner!

Go to launch creader v,maxidas ds708

Read More
Tags: , ,
Comments Off
TOP

CRecorder — Car running data Recorder

Apr 05
Posted by vtool in Uncategorized

CRecorder is a remote diagnostic tool developed with car owners in mind. The recorded data is analysing by client software, the waveform can be displayed in diagrams or table form. Helped by the networking of the Crecorder website and client software, now giving remote diagnosis and turning it into reality.

- Remote service provided by specialists
- Real-time data collection
- Waveform displayed in diagrams and tables

 

 

 

 

 

 

 

 

 

Supported Protocols:
OBDII: ISO9141, SAE J1850VPW, SAE J1850 pwm
EOBD: ISO14230 KWP
CANBUS: ISO15765

Crecorder Website
- Receive data from terminals all over the world
- Send reports to users to make remote diagnosis possible
- Provide expert support and technical exchange platform for users
- Data storage

 

 

 

 

 

 

 

 

 

 

 

 

Features
- Plug-and-play tool with compact design
- Automatic recording of data without human interference
- User-friendly interfaces and clear display of data
- Remote diagnosis through connection with Crecorder website


Client Terminal Software
- Read the data on the recording device
- Display trouble code definition and waveform data recorded
- Upload and download data from Crecorder website
- Online payment function

 

Go to launch creader v, maxidas ds708

Read More
Tags: , ,
Comments Off
TOP

Introduction About Creader V

Apr 04
Posted by vtool in launch creader v

Creader V is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician or the weekend user. The feature of upgrading online ensures it can test new model vehicle and/or functions in the future.

 

 

 

 

 

 

 

 

 

 

 

 

 

The Easiest And the Best Way To Troubleshoot your Vehicle!
I. Easy to Use
Connect the Creader V to the car’s socket
II. Easy to Read and View
Read the code from Creader V and view the graph of Freeze Frame data and I/M Readiness status on the big LCD display screen clearly
III. Easy to Repair and Clear
Repair and clear the trouble code with launch creader v

 

Go to Creader VI

Read More
Tags:
Comments Off