TOP

VAG Airbag Reset Tool

Aug 18
Posted by vtool in airbag reset tool

Use this wiring:
Airbag sensor: K-line = pin 9, GND = pin 6, +12V = pin 5
VAG Airbag Reset Tool: K-line = pin 7, GND = pin 4+5, +12V = pin 16


Apply +12V power supply and push RED or BLACK button on the VAG Airbag Tool.

VAG cars 1997-1999 airbag sensor with yellow or orange 50-pin connector.
- VW – Golf IV, Passat B5: 1J0 909 609, 1J0 909 607 – SIEMENS – Crash data erase, Fault erase;
- AUDI A3, A4, A6, A8 <1999: Airbag 7 BOSCH – 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L, 8L0 959 655 F – all
Bosch Airbag 7 – Crash data erase, Fault erase;


You can connect this sensor on the table and erase crash data using our VAG Airbag Tool.
Use this wiring:

Airbag sensor: K-line = pin 5 (connected with car OBDII connector pin 12), GND = pin 6, +12V
= pin 8, airbag lamp = pin 9;
VAG Airbag Reset Tool: K-line = pin 12, GND = pin 4+5, +12V = pin 16;
Apply +12V power supply and push RED or BLACK button on the VAG Airbag Tool.

Audi cars 2000 -2002 airbag sensor with yellow 84-pin connector.

- Audi A2, A3, A4, A6, A8 – 1999<: Airbag 8 BOSCH – Crash data erase, Fault erase (can erase “Controller Malfunction”);

- 8L0 959 655 G (Bosch 0 285 001 352) and others with HC12 processor;
- 4D0 959 655 J (Bosch 0 285 001 266), 8D0 959 655 J (Bosch 0 285 001 276), 8D0 959 655 F (Bosch 0 285 001 270), 8D0 959 655 M and others with National CR16 (44 PLCC);

You can connect this sensor on the table and erase crash data using our VAG Airbag Tool.

Use this wiring:

Airbag sensor: K-line = pin 67 (connected with car OBDII connector pin 7), GND = pin 66, +12V
= pin 65, airbag lamp = pin 68 and 70;
VAG Airbag Reset Tool: K-line = pin 12, GND = pin 4+5, +12V = pin 16

Apply +12V power supply and push RED or BLACK button on the VAG Airbag Tool.

 

 

Read More
Tags: , ,
Comments Off
TOP

Odometer Adjust For Super VAG K CAN V4.8

Jul 10
Posted by vtool in car diagnostic tool

Access to the main menu, select [Odometer Adjust] key, press OK Keys, appear menu options.

According to the type of odometer, select the corresponding option. Maily odometer is divided into K line and CAN line, but the K line and CAN have different manufacturers, different versions, different types of odometer. User can choose K-line or CAN line automatic way, for some special odometer, user select the corresponding instrument through the menu.
Select the corresponding instrument, press OK key, the following information will appear:

When appear the version information, press any key, it will appear:

Note: Some instruments, need to manually enter the old mileage, and some instruments can be directly read the mileage. If the mileage can not automatically read the meter, enter the current mileage meter, for example, the A6L Marelli instrument which is CAN interface, need to manually enter the old mileage.
Enter new miles, press OK button, the equipment began to update the dashboard, after update successful, the below information is shown on the screen:

Note: After Odometer adjustment is successful, device will automatically reset instruments. After that, some instruments need to disconnect the fuse, and then re-power. Set correct date and time before we can work,for example: the audi a4 RB4, RB8 instruments, if not do that, it will appear the symptoms, can’t ignition. Press any key to return to the menu.

Read More
Tags:
Comments Off