Use this wiring:
Airbag sensor: K-line = pin 9, GND = pin 6, +12V = pin 5
VAG Airbag Reset Tool: K-line = pin 7, GND = pin 4+5, +12V = pin 16
Apply +12V power supply and push RED or BLACK button on the VAG Airbag Tool.
VAG cars 1997-1999 airbag sensor with yellow or orange 50-pin connector.
- VW – Golf IV, Passat B5: 1J0 909 609, 1J0 909 607 – SIEMENS – Crash data erase, Fault erase;
- AUDI A3, A4, A6, A8 <1999: Airbag 7 BOSCH – 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L, 8L0 959 655 F – all
Bosch Airbag 7 – Crash data erase, Fault erase;
You can connect this sensor on the table and erase crash data using our VAG Airbag Tool.
Use this wiring:
Airbag sensor: K-line = pin 5 (connected with car OBDII connector pin 12), GND = pin 6, +12V
= pin 8, airbag lamp = pin 9;
VAG Airbag Reset Tool: K-line = pin 12, GND = pin 4+5, +12V = pin 16;
Apply +12V power supply and push RED or BLACK button on the VAG Airbag Tool.
Audi cars 2000 -2002 airbag sensor with yellow 84-pin connector.
- Audi A2, A3, A4, A6, A8 – 1999<: Airbag 8 BOSCH – Crash data erase, Fault erase (can erase “Controller Malfunction”);
- 8L0 959 655 G (Bosch 0 285 001 352) and others with HC12 processor;
- 4D0 959 655 J (Bosch 0 285 001 266), 8D0 959 655 J (Bosch 0 285 001 276), 8D0 959 655 F (Bosch 0 285 001 270), 8D0 959 655 M and others with National CR16 (44 PLCC);
You can connect this sensor on the table and erase crash data using our VAG Airbag Tool.
Use this wiring:
Airbag sensor: K-line = pin 67 (connected with car OBDII connector pin 7), GND = pin 66, +12V
= pin 65, airbag lamp = pin 68 and 70;
VAG Airbag Reset Tool: K-line = pin 12, GND = pin 4+5, +12V = pin 16
Apply +12V power supply and push RED or BLACK button on the VAG Airbag Tool.